MIP

by | Apr 1, 2024 | Mini Inverter

MIP – Mini Inverter Pack

The Evenlite MIP is a refined, fully featured Emergency Lighting Inverter in a traditional compact power pack format for installation versatility, suitable for mounting within, on or remotely to the desired emergency luminaires.

MIP-36 and MIP-100 – Shipping Now!

DOWNLOADS

>> Specification Sheet
>> Terms and Conditions of Sale
>> MIP 36 Installation Instructions
>> MIP 100 Installation Instructions

SPECIFICATION INFORMATION

 

  • Slim and versatile extruded aluminum housing
  • 21” lead wires with ½” flexible metallic conduit
  • Suitable for use in plenum, damp and dry locations or grounded damp location rated luminaires
  • Multi-function LED and Test Switch
 

  • Pure Sine Wave AC pulse width modulated (PWM) output
  • Automatic Voltage Input/Output select 120-277VA 50/60Hz
  • Adaptive 0 – 10V dimming of connected loads
  • Universal 120/277 VAC, 60Hz. Input/output
  • Field Selectable Self-Test/Self Diagnostics. Preprogrammed Scheduled Self-Test will occur after 24 hours and up to 7 days after initial power on. Monthly tests will occur every 30 days after initial power on
  • Annual tests will occur every 52 weeks after initial power on
  • Supports Switched, Normally-ON, Normally-OFF or Adaptive Dimming input wiring
  • Remote Mounting Distance of up to 1,000 ft
  • Long Life, high capacity, maintenance-free Lithium-ion battery provides required 90 minutes of emergency duration and environmentally friendly end of life recycling
  • Over voltage, over current, inrush current limiting, over temperature, short circuit, and open circuit protections
  • Zero current LVCO ensures positive charge acceptance following extended battery discharge
  • Brownout sensing assures emergency illumination during periods of low line voltage
  • Can be derated for FEMA 2 Hours emergency duration
  • Efficiency Rating: 80% (MIP-36) & 84% (MIP-100)
  • Rated current: 0.1A (MIP-36) & 0.48A @ 120V (MIP-100)
  • Rated power: 7W (MIP-36) & 35W (MIP-100)
  • Output Power: 36W (MIP-36) & 100W (MIP-100)
  • Maximum Pass through: 360W (MIP-36) & 900W (MIP-100)
  • Charging time: 24 hours (MIP-36) & 12 hours (MIP-100)
  • Charging current: 0.34A (Max) (MIP-36) & 0.6A (MIP-100)
  • Operating Temperature: 0-50C (32 – 122F)
 

  • Tested and Listed by Underwriters Laboratories in compliance with UL924 and Canadian CSA-C22.2 No. 141-15
  • UL924 listed for field installation
  • California Title 20 Certified
  • Meets or exceeds NFPA101 Life Safety Code, NFPA 70-NEC and OSHA requirements