EV1400TD-SDT

by | Dec 2, 2021 | DISCONTINUED

EV1400TD-SDT

Fluorescent Emergency Ballast 1400 Lumens with Self-Diagnostics

Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one or two lamps in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 1400 lumens. Durable painted steel construction in white finish. Compact design fits most fluorescent fixtures.

DOWNLOADS

>> Specification Sheet


*When battery packs are remote mounted, the remote distance cannot exceed 1/2 of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet.
NOTE: In 2-lamp operation, lumens are equally split between the two lamps.
NOTE: Refer to the spec sheet for complete chart.

SPECIFICATION INFORMATION

 

  • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing
  • Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum
  • 90-minute emergency illumination
  • Fully automatic so/id-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours
  • Time delay enhancement to overcome end-of-life circuit protection
  • Self-diagnostics feature performs monthly biannual and annual tests to ensure reliable operation and meet electrical and life safety codes
  • Remote Mounting: Suitable for installation inside, on top or in remote* of the fixture
  • Can be used in both switched and unswitched fixtures
  • UL Listed for factory or field installation
  • Suitable for use in sealed and gasketed fixtures
 

  • Input Voltages: 120/277
  • Emergency Operation: 90 minutes
  • Initial Illumination: Provides a maximum initial lumen output of 1400 lumens
  • Operating Temp: UL Listed for damp locations (0°C – 50°C)
  • Battery: 6V long life, maintenance-free, rechargeable sealed NiCd battery
  • Self-diagnostics: Self-diagnostics feature performs monthly biannual and annual tests to ensure reliable operation and meet electrical and life safety codes
  • Approval: UL Listed for factory or field installation
 

  • Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes
 

  • 5-year warranty against defects in material and workmanship. (Lamps excluded.)
 

  • Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts
  • Operates one or two T5, T5HO, T8, T12, T8HO, T12HO, Circular T5/T9, U-bend T8/ T12, 4-Pin CFL and long CFL lamps in emergency mode. Refer to the chart below for a list of compatible lamps
 

  • 13.375” x 2.375” x 1.5”