EV3000TD-SDT
Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one or two lamps in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 3000 lumens. Durable painted steel construction in red finish. Provided with 2’ flex conduit.
DOWNLOADS
*When battery packs are remote mounted, the remote distance cannot exceed 1/2 of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet.
NOTE: In 2-lamp operation, lumens are equally split between the two lamps.
NOTE: Refer to the spec sheet for complete chart.
SPECIFICATION INFORMATION
- Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting
- Operates one or two lamps in the emergency mode for a minimum of 90-minutes
- Provides a maximum initial lumen output of 3000 lumens
- Durable painted steel construction in red finish
- Provided with 2’ flex conduit
- Input Voltages: 120/277
- Emergency Operation: 90 minutes
- Initial Illumination: Provides a maximum initial lumen output of 3000 lumens
- Operating Temp: O° to 50° C
- Battery: 14.4V long life, maintenance-free, rechargeable sealed NiCd battery
- Self-diagnostics: Self-diagnostics feature performs monthly biannual and annual tests to ensure reliable operation and meet electrical and life safety codes
- Approval: UL Listed for damp locations
- Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes
- UL Listed for damp locations (0°C – 50°C)
- 5-year warranty against defects in material and workmanship (Lamps excluded)
- Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts
- Operates one or two T5, T5HO, T8, T12, T8HO, T12HO, Circular T5/T9, U-bend T8/ T12, 4 Pin CFL and long CFL lamps in emergency mode. Refer to the chart below for a list of compatible lamps
- 16.4” x 5.6” x 1.75”
